Mechanical seal H-brinker
HBSplitex
Operating range Mechanical seal HBSplitex
Shaft diameter:
d1 = 50 … 150 mm (1.940″ … 6.000″)
Pressure: p1 = 10 bar (145 PSI)
Temperature:
t = -40 … +150 °C (- 40 … + 300 °F), above 80 °C (175 °F) flush is recommended
Sliding velocity: vg = 10 m/s (33 ft/s)
Axial movement: ±1.5 mm (1/16″)
Radial movement: ±0.8 mm (1/32″)
Table of Mechanical seal descriptions HBSplitex
Item | Description |
1 | Seal face |
2, 5, 7 | O-Ring |
3 | Spring |
4 | Seat |
6 | Driver |
8 | Thrust ring |
9 | Clamp collar |
10 | Housing |
11 | Assembly fixture |
12, 15 | Gasket |
13 | Head screw plug |
14 | Mounting plate |
16 | Set screw |
17 | Socket head screw |
Features Seal HBSplitex
- Fully split single seal, 2 x 2 segments, pre-assembled
- Semi-cartridge
- Balanced
- Stationary springs
- Bi-directional
- External pressurization
- Built-in flushing connections
- Installation and wear control
Advantages mechanical seal HBSplitex
- Reduced repair and downtime: 2 x 2 pre-assembled design speeds up and simplifies installation installation because pump does not have to be disassembled.
- Long service life: precise pre-alignment because of pre-assembled segments.
- Stationary springs which are protected from the product prevent clogging.
- Greater flexibility during installation: no modification necessary because the seal is located outside of the stuffing box.
- Shaft protection: uniform torque transmission via clamping ring prevents damage caused by set screws.
- Dependable operation: mechanical decoupling of clamping ring (torque transmission) avoids distortion of the seat.
- Simple monitoring of the seal during operation because of mechanical wear indicator on the seal face.
- Low leakage: elimination of secondary seals eliminates leakage paths between split components.
- High tolerance to shaft deflections ensured by stationary design and elastic seat mounting (gasket).
Materials Seal HBSplitex
- Seal face: Carbon graphite antimoniny impregnated (A), Silicon carbide (Q6)
- Seat: Silicon carbide (Q6)
- Secondary seals: FKM (V), EPDM (E), NBR (P)
- Springs: CrNiMo steel (G)
- Metal parts: CrNiMo steel (G)
Recommended applications seal HBSplitex
- Process industry
- Petrochemical industry
- Chemical industry
- Power plant technology
- Pulp and paper industry
- Centrifugal pumps
- Agitators
- Displacement pumps
- Conveying pulp with stock pumps
- Conveying timber to refiners with pumping screws
- Circulation of pulp-and-water mixtures in storage vessels
- Pump stations for waste water treatment
- Cooling water pumps for energy generation
Dimension Table Seal HBSplitex
dw | dw | d1 | d2 | da | a | s | l1 | l2 | l3 | l4 | l5 | X |
---|---|---|---|---|---|---|---|---|---|---|---|---|
50 | 1.969 | 75 | 84 | 138 | 88 | 15 | 63 | 61 | 30 | 45 | 3 | 3/8 NPT |
60 | 2.362 | 89 | 101 | 149 | 105 | 17,5 | 64 | 62 | 30 | 46 | 3 | 3/8 NPT |
70 | 2.756 | 98 | 113 | 176 | 118 | 20 | 64 | 62 | 30 | 46 | 3 | 3/8 NPT |
80 | 3.150 | 110 | 132 | 191 | 135 | 20 | 65 | 63 | 31 | 47 | 3 | 3/8 NPT |
90 | 3.543 | 121 | 140 | 203 | 145 | 22 | 72.5 | 70.5 | 31.5 | 50.5 | 3 | 1/2 NPT |
100 | 3.937 | 131 | 150 | 216 | 155 | 22 | 72.5 | 70.5 | 31.5 | 50.5 | 3 | 1/2 NPT |
110 | 4.331 | 142 | 165 | 230 | 170 | 22 | 72.5 | 70.5 | 31.5 | 50.5 | 3 | 1/2 NPT |
120 | 4.724 | 152 | 175 | 240 | 180 | 22 | 72.5 | 70.5 | 31.5 | 50.5 | 3 | 1/2 NPT |
125 | 4.921 | 162 | 185 | 268 | 190 | 26 | 89.5 | 87.5 | 43.5 | 62.5 | 4 | 1/2 NPT |
140 | 5.512 | 175 | 200 | 303 | 205 | 26 | 89.5 | 87.5 | 43.5 | 62 | 4 | 1/2 NPT |
150 | 5.906 | 188 | 215 | 308 | 220 | 26 | 89.5 | 87.5 | 43.5 | 62.5 | 4 | 1/2 NPT |